|
|
Build Your Online Product Catalogs?
| Product Name: |
Car inverter power supply
|
| Supply Ability: |
1000 Thousands |
| Related proudcts |
|
| Specifications |
inverter |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
10 |
| Unit Price: |
|
|
Product ***ails
I. Introduction:
The inverter using the co***ny's intelligent IC control, the circuit has applied for patent protection has a very complete (including overload protection, overcurrent protection, high temperature protection, short circuit protection, reverse polarity protection, battery high. Low-voltage protection, with built-in fuses, etc.), indicating functional. Use of high-quality double-sided circuit boards and zero devices, guarantee product quality, high-performance. The machine output waveform is pure sine wave, can be applied to any load, overload, overcurrent, short circuit protection, protection start automatically after 10 seconds delay. The size of this machine is very co***ct, easy to carry.
2: Using the method of
Would be sufficient to power the input power supply connected to the inverter, pay attention to the supply voltage should be within the specified scope, connect the power cable must be adequate current-carrying capability, and as short as possible, open the inverter's power switch, the output load in the pre-boot or post-boot access can be (my co***ny's products with a standard power cord).
3, input power requirements:
Input supply voltage must be provided in the inverter voltage range.
Input power must be able to provide sufficient current, which is about a specific algorithm for output power / input voltage / 0.8 = output current, for example: with a 500W load, input 12V, the input current = 500/12/0.8 = 52.1 (A) .
Input power cord must be firmly connected with the inverter, and a sufficient bearing capacity. If the current is 52.1A, the power line cross-sectional area should be larger than 16 mm.
4, Technical parameters:
Model
SET-S50012A5
Rated
500W
Peak power
1000W
Input
10-15.5VDC
Output Voltage
220VAC ¡À 5%
Output Frequency
0Hz
Output waveform
Pure sine wave
Efficiency
"82%
5, protection:
Input reverse protection
Automatic recovery
Input fuse
80A
Input v |
| Company: |
ShenZhen SETEC Power Co.,Ltd
|
| Contact: |
Mr. tony pan |
| Address: |
Shenzhen City Xili Town, Nanshan District, Industrial Park 199 Kan Si Teke |
| Postcode: |
518055 |
| Tel: |
0755-26527304-813 |
| Fax: |
0755-26527104 |
| E-mail: |
|
|
|
|
Home
